After installing three Albatron PCI graphics cards (PCI8600GT), I have found
out the best way to get it installed. The first install took over 3 hours to
finally get Windows to use the card. On the second install took just 2
hours to finally get Windows to use the card. Then "Three Times a charm",
I found the best way to install the card, which only took 20 minutes.
These installation instructions are not included with the installation
instructions from Albatron.
Power off the system and remove the power plug.
Install the card to an empty PCI slot with plenty of room for the
card/fan to get air.
Keep your monitor cable connected to original monitor connector
(on-board or AGP)
Reconnect power cable and power up system
Check BIOS settings for video controller. Set to AUTO or OEM
recommended video setting for video graphics cards.
Restart to windows
After the reboot you should see NEW HARDWARE FOUND Dialog box.
Click NEXT
Verify that it is detecting the Nvidia Geforce 8X00 card